BIOS recognizes SSD but won’t boot [Full Fix]

It can be frustrating when your computer is not recognizing an SSD and won’t boot. This article will walk through the troubleshooting steps to fix this problem without much fuss.

The “ssd recognized but not booting” is a problem that may be solved with the help of a BIOS update. The solution to this issue is to update your BIOS to recognize SSDs.

BIOS recognizes SSD but won't boot [Full Fix]


Milan Stanojevic is a writer who lives in Belgrade, Serbia.

Windows & Software Expert

Milan has been fascinated by computers since he was a youngster, and this has led him to be interested in all PC-related technology. He worked as a front-end web developer before joining WindowsReport. Continue reading

22nd of March, 2022

Publish date: October 2020

  • Because SSDs are many times quicker than hard drives, they are one of the finest improvements you can make to your PC.
  • Many consumers have complained that their BIOS sees their SSD but will not start their computer from it, so we’ll teach you how to repair that today.
  • Do you want to learn more about solid-state drives (SSDs)? We have a full article devoted to solid-state drives.
  • Do you have problems with your computer or laptop? All of the answers you want may be found in our PC/Laptop troubleshooting area.



We propose DriverFix to repair a variety of PC issues: This program will maintain your drivers up to date, ensuring that you are protected against frequent computer issues and hardware failure. Check all of your drivers right now in three simple steps:

  1. DriverFix may be downloaded here (verified download file).
  2. To discover all faulty drivers, click Start Scan.
  3. To receive fresh versions of drivers and prevent system failures, go to Update Drivers.
  • This month, 0 readers have downloaded DriverFix.

SSDs are great because they provide better performance, but many users have reported that their BIOS recognizes the SSD but that their computer will not boot from it.

This may be a major issue, particularly if you replaced your hard drive with a new SSD. The solution to this issue is straightforward, and we’ll show you how in today’s post.

Why won’t my computer start after I installed an M.2 SSD? ?

It’s conceivable that Windows will refuse to start from a second hard drive if it’s not correctly configured, and this is also true with M.2 storage.

It’s also possible that the SSD isn’t shown in the boot choices because it’s not connected correctly, so double-check everything.

This isn’t the only problem that users have observed; several have stated that their PC boots from the hard disk rather to the SSD, but there is a workaround.

What should I do if the BIOS detects the SSD but it won’t boot?

1. Backup using Backupper by AOMEI


If you’re experiencing problems with your SSD, Backupper by AOMEI might be of assistance. The program can effortlessly backup your whole system or drive, enabling you to migrate all of your contents to a new SSD.

GPT to MBR cloning is supported by the program, which may be useful if you’re migrating an outdated operating system to a new PC.

Backups are supported by the program, which includes incremental and differential backups as well as a file backup capability.

It’s also worth noting that the program includes the Hot backup function, which allows you to generate backups in the background while you work on other things.

Expert Tip: Some PC problems, such as damaged repositories or missing Windows files, are difficult to resolve. If you’re having problems repairing a mistake, it’s possible that your system is partly broken. Restoro is a tool that will scan your computer and determine the source of the problem. To download and begin mending, go here.

We suggest checking out Backupper by AOMEI since it has a lot of useful capabilities, particularly if you need to migrate data from a hard disk to an SSD.

Other noteworthy aspects include:

  • Backup to NAS, network storage, external storage, or the cloud is possible.
  • Support for the command line
  • Backups that are triggered by events
  • Backups on a regular basis
  • Cloning with a lot of options


Backupper by AOMEI

Backupper by AOMEI is a backup software that can easily move your operating system to a new SSD drive.

2. Select the Legacy boot option.


  1. Start your computer and go to BIOS.
  2. Make sure you have both UEFI and Legacy or Legacy boot enabled in the Boot options.

It is advised to consult your motherboard handbook for specific information on how to locate this option.

3. Reset the BIOS settings


  1. Ascertain that your SSD is the only storage device attached to your motherboard. Also, ensure sure the SSD is linked to the motherboard’s SATA 0 port.
  2. Check to see if this resolves the issue.
  3. If the problem persists, go into BIOS and restore the default settings.

If your vintage BIOS detects an SSD but not as a bootable device, this solution may be handy, so give it a go.

4. Install Windows 10 again.


If your SSD is detected but you still can’t boot, resetting Windows 10 could be your only option. You may also try doing a clean install of Windows 10 on SSD, which some people recommend.

A few people have stated that they are unable to install Windows 10 on an SSD, however we have previously addressed this in one of our previous posts.

More information about this subject may be found here.

5. Make a BIOS update


  1. Get the most recent BIOS for your motherboard.
  2. Flash your BIOS to the most recent version using the supplied file.

Keep in mind that updating the BIOS is a complex operation that might harm your motherboard, so be careful to follow the directions in the motherboard handbook to prevent harming it.

6. Format the other drive’s System Reserved partition.

  1. Return to the Windows desktop.
  2. Select Disk Management by pressing Windows Key + X. 1647951531_507_BIOS-recognizes-SSD-but-wont-boot-Full-Fix
  3. Attempt to find and delete the System Reserved partition on the old hard disk.
  4. You’ll have to format the hard disk if it doesn’t work. To do so, right-click the hard disk and choose Format from the menu. 1647951532_743_BIOS-recognizes-SSD-but-wont-boot-Full-Fix
  5. To finish the formatting procedure, follow the directions on the screen.

If you have boot files on both your SSD and hard drive, you may be able to repair the problem by formatting the hard drive.

Note: This method will erase all of your contents from the hard drive, so make a backup before proceeding. Only use this procedure if all other options have failed to solve your issue.

It might be frustrating not to be able to utilize your new SSD, but we hope that after reading this post you were able to resolve any SSD booting difficulties on your PC.

1647681908_562_How-to-install-Amazon-Appstore-on-Windows-11-outside-US Are you still experiencing problems? Use this tool to fix them:

  1. Download this PC Repair Tool (download starts on this page).
  2. To detect Windows faults that may be causing PC difficulties, click Start Scan.
  3. To repair faults with Patented Technologies, click Repair All (Exclusive Discount for our readers).

This month, 0 readers have downloaded Restoro.

Was this page of assistance to you?

Thank you very much!

There are insufficient details It’s difficult to comprehend Other Speak with a Professional

Start a discussion.

The “windows 10 not booting from ssd after install” is a problem that many people have been experiencing. The “BIOS recognizes SSD but won’t boot” is an easy fix for the issue.

Frequently Asked Questions

How do you fix a SSD that wont boot?

A: A hard drive that wont boot is usually caused by a physical issue with the disk itself. In some cases, this can be fixed by using a canned air to blow out any dust inside of it and then replacing the power supply or simply unplugging it for 15 minutes and turning it back on. If none of these work, you will have to manually reinstall Windows 10 onto your new hard drive which could take hours if not days depending on how complex certain parts are in Windows 10.

How do I set my SSD to boot to BIOS?

A: You must first locate your System Setup menu in order to set it up. If youre unable for some reason, please refer to the motherboard manual.

Why is my SSD not showing up in boot priority?

A: SSDs are usually not a good fit for the boot disk, because they can be unreliable. If you want to use an SSD as your primary drive and still keep it in its best performance state, please back up everything first with a hard drive or two before formatting and using the SSD as your main operating system.

  • ssd detected in bios but not booting
  • ssd not booting uefi
  • ssd detected but not booting reddit
  • hard drive detected in bios but won’t boot
  • bios not recognizing windows 10
You May Also Like