If you own a Samsung Galaxy Tab A 8.0 SM-T290 tablet and want to perform root and flash TWRP Recovery 3.4.0 on your device, then you have visited the right site. XDA senior member geiti94 has released a unified version of TWRP 3.4 for Samsung Galaxy S20 series tablets. Please note that the TWRP flashing and rooting process will irreversibly disable the KNOX warranty bit, thus voiding the warranty and preventing you from receiving any more firmware updates as the next OTA updates will be disabled.
If you are an Android enthusiast and want to do TWRP recovery on your beloved device, you have come to the right place. We will soon explain the process of installing TWRP and the rooting of the Samsung Galaxy Tab A 8.0 SM-T290.
The Samsung Galaxy Tab A 8.0 2019 SM-T290 has the following specifications: Qualcomm SDM429 Snapdragon 429 (12nm) chipset, 2.0 GHz Cortex-A53 quad-core CPU/CD, Adreno 504 GPU, 8.0-inch display, 185.6 cm2 (screen-to-body ratio ~71.0%), TFT, 800 x 1280 pixels, 16:10 aspect ratio (density ~189 pixels per inch), 32GB 2GB internal store/RAM, 8MP main camera, AF, 2MP car camera, 5100mAh Li-Po battery, non-removable.
The TWRP is characterized by its material design and attractive user interface (UI). If you follow this manual, you can install the latest TWRP for Samsung Galaxy Tab A 8.0 SM-T290. You can download TWRP Recovery from the links in the example section of this article. Please note that this is an official TWRP recovery and only for the Samsung Galaxy Tab A 8.0 SM-T290 (Confirm the model by going to Settings > About). The process described below is only for rooting and installing TWRP on the Samsung Galaxy Tab A 8.0 SM-T290, do not test this method on other devices.
If you want to exploit the full potential of your Samsung Galaxy Tab A 8.0 SM-T290 hardware, the most important task is to run and flash the TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a root device and a flash TWRP recovery, you can install all custom ROMs, modules, kernels, Xposed, etc., as well as many applications that need root access to function properly.
READ ALSO how to install the Samsung Galaxy J3 LTE SM-J320 root and TWRP recovery
Brief information and benefits of TWRP recovery
The TWRP (Team Win Recovery Project) is an open source community development project. When you flash TWRP, your device can install any custom firmware, install tablet root firmware, install mod zip files for settings, Xposed modules for custom functions, one-click root processes and provisioning processes. You can also make a full backup of Nandroid and restore it later, flash the image file with a single click, remove bloatware, overclock and underclock. The TWRP allows you to easily erase, cache and delete data after flashing an image file to display changes and correct minor errors caused by caching.
To install TWRP, the Samsung Galaxy Tab A 8.0 SM-T290 tablet must have an unlocked startup charger. This means that you first need to unlock the bootloader to install the root of the device, as well as to perform any configuration.
Disclaimer : While AndroidWeblog.com covers everything very clearly, so that our readers get exactly what they want, there is still a modest chance that the steps mentioned here will cause major problems. It is therefore in the user’s interest to take great care in preventing accidents with the device.
Installing a custom ROM firmware and flashing it will definitely void your device’s warranty and AndroidWeblog.com cannot be held responsible for invalid warranties or limited devices.
Check the model number, which must be stated:
- Samsung Galaxy Tab A 8.0 [Models : [SM-T290, SM-T295] Android 10 A user interface 2.0
You should read the disclaimer carefully before tearing off the shelf and accepting the additional risk.
The tablet must be 70% loaded, otherwise complications may occur during the experiments. Why take the risk of trying to fully charge it.
If you want to install a root in the tablet or a custom ROM, it’s a good habit to back up the tablet. Back up all your media such as photos, videos and everything else on your PC and your contacts in the cloud.
ALWAYS know how to install the HTC U11 root and TWRP recovery.
You need to enable the USB debugging option by going to Settings, Applications, and Developer Options.
Downloads for root Samsung Galaxy Tab A 8.0 SM-T290 Android 10 One UI 2.0
Download Samsung drivers here (if you already have drivers installed on your PC, ignore this).
Download Odin from here.
Download the TWRP Recovery for Samsung Galaxy Tab A 8.0 SM-T290 from here:
TWRP Recovery 3.4.0-1
(Galaxy Tab A 8.0 [SM-T290])
Download SuperSU via Chainfire from here.
Download Magisk Manager from here.
steps to flash/install TWRP on Samsung Galaxy 8.0 SM-T290 Android 10 A 2.0 user interface tab
Step one: First enable USB debugging on your device. To enable USB debugging, simply enter the Developer setting. Go to Settings>About Tablet> and tap the house number 7-8 times until the message Developer Enabled appears. Once the development options are active, you can go back to Settings> Development Options> Enable USB Debugging.
Step two: Suppose you have already downloaded the latest Odin and TWRP recovery for your device from the preview area above. If the latest version of Odin does not work on your device or if you have problems, just download the correct version of Odin.
Step three: Make sure you have already downloaded TWRP Recovery for your Samsung device. Just unpack the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.
Step four: Once the device is turned off, simultaneously press the Power+Volume down+Home keys and the device enters the start-up mode. If this key combination does not work for your device, simply search for this key combination for your device on Google.
Step five. Now connect your Samsung device to your computer using a USB cable. Then navigate to the folder where the Odin files were extracted and right click on the Odin executable file and then click Run as Administrator.
Step six: The interface should display something like ID:COM below, and check the interface below carefully.
Step seven: Note the ID:COM and the empty field below, which turns blue as soon as the device is detected. The device should be detected when the correct drivers are installed on the computer.
Step 8 : Then just click AP, go to the firmware archive, find the .tar.md5 file and select it after clicking AP.
So read how to install TWRP Root and Recovery on the Elephone P9000.
Pay attention: There’s a PIT zone in the area. Do not put a file in the PIT section and make sure that redistribution is not enabled. Tick the box and place a check mark next to Auto-Restart and F. Reset Time.
Step 9 : Once the TWRP file (.img) has been uploaded to the AP field, the process can start flashing or installing. Be careful not to touch the USB cable while flashing.
Step 10 : If all goes well, you will see a green PASS or RESET message at the end indicating that the TWRP firmware process for your device has been successfully completed and that it now has a TWRP recovery function. At this point, the device will restart automatically, don’t panic, it’s normal. You can now disconnect the device from the computer.
How to connect your Samsung Galaxy A 8.0 SM-T290 Tab to Android 10 one UI 2.0/Install Magisk or SuperSU
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then go through the steps.
Pay attention: You can use Magisk Manager or Super SU, but only one, so choose well. If you’re not sure, go to Magisk Manager.
Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy Tab A 8.0 SM-T290 tablet.
Step two: Now all we have to do is start the recovery. You can also back up the ROM via the TWRP interface. However, I recommend making a backup copy of the ROM. Because if the process fails, you can make the ROM blink.
Step three: Press Install and then navigate to SuperSU.zip or magisk.zip and drag the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you now have a Samsung Galaxy Tab A 8.0 SM-T290 properly anchored and a TWRP flasher. You can now install Xposed Framework and customize your tablet as you wish. If you want to check this, you can download the root status and check it through the Root Checker application.
t295 samsung root,twrp_3 0.2 1_sm-t350_mm_9816 tar,samsung root driver download,sm-t290 download mode,sm-t387v twrp,sm t387aa root,sm-t290 combination file,galaxy tab a 8" root,sm-t290 android 10,frija samsung,samsung galaxy tab a 2019 unlock bootloader,sm-t295 twrp,lineage os sm-t290,frija,sm-t510 unlock bootloader,root tablet sm-t515,twrp 3.3 1 0 t510xxu1asc7 tar,sm t517p xda,odin twrp,how to root samsung galaxy tab a 10.1 2019,twrp s7,twrp s8,twrp 3.0 apk download,twrp recovery img,twrp no root,twrp samsung j7,root for sm-t290,sm-t290 unlock bootloader,twrp galaxy tab a 8.0 2019,twrpsamsung sm-t290,sm-t290 magisk,how to root samsung galaxy tab a 8.0 without computer